manualshive.com logo in svg

Clevo N850HJ1, User Manual

Share
Download
Clevo N850HJ1 User Manual Download Page 15

XIII

Preface

Cleaning

Do not apply cleaner directly to the computer; use a soft clean cloth. 
Do not use volatile (petroleum distillates) or abrasive cleaners on any part of the computer.

Cleaning Instructions

(

For Computer Models Supplied with Light Blue Cleaning Cloth

)

Some computer models in this series come supplied with a light blue cleaning cloth. To clean the computer case
with this cloth follow the instructions below:

1.

Power off the computer and peripherals.

2.

Disconnect the AC/DC adapter from the computer.

3.

Use a little water to dampen the cloth slightly.

4.

Clean the computer case with the cloth.

5.

Dry the computer with a dry cloth, or allow it time to dry before turning on.

6.

Reconnect the AC/DC adapter and turn the computer on.

Summary of Contents for N850HJ1

























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands