Clevo N350TW, Service Manual, Page: 29 / 112

Disassembly
Removing the Battery 2 - 5
2.Disassembly
Removing the Battery

3. Battery
1. Turn the computer off , and turn it over.
2. Slide the latch in the direction of the arrow ( Figure 1a
)
.
3. Slide the latch in the direction of the arrow, and hold it in place ( Figure 1a ) .
4. Slide the battery in the direction of the arrow ( Figure 1b
)
.
5. Make sure the latch is in the unlock position, and slide the battery into the bay until it locks into position. Make
sure both locks are locked after the battery is in the bay.
1
2
6 3 4
5
Figure 1
Battery Removal
a. Slide the latch and hold it
in place.
b. Slide the battery out.
c. Slide the battery in.
a.
b.
3
4
1 2
c.
5