manualshive.com logo in svg

Clevo N1X0SD, User Manual, Page: 67 / 336

Share
Download
Clevo N1X0SD User Manual Download Page 67

Windows 8.1 Start Screen & Desktop 1 - 31

Quick Start Guide

1

The Charms Bar

The right side of the screen (Start or Desktop) displays the 

Charms Bar

. The 

Charms Bar

 contains the 

Search

,

Share

, 

Start

, 

Devices

 and 

Settings

 menus. To access up the 

Charms Bar

 move the cursor to the upper or lower

right corners of the screen, and then hover over one of the items in the 

Charms Bar

 to activate it (the bar will

be black when it is active), or use the 

Windows Logo Key 

 + C 

key combination.

 

Figure 1 - 20

 - Start Screen with Charms Bar

 

Move the mouse over a Charms Bar icon to activate the menu 

Move the mouse to the top/lower right icons to activate the Charms Bar 

Move the mouse to the top/lower right icons to activate the Charms Bar 

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments