manualshive.com logo in svg

Clevo N1X0SD, User Manual, Page: 312 / 336

Share
Download
Clevo N1X0SD User Manual Download Page 312

E - 12 Power Options

Windows 10

Windows 10

Power Options

Power Options (Hardware and Sound)

 can be accessed from the Control Panel. The 

Power

 button item in

Start Menu

 (or the context menu) may be used to 

Shut down

 or 

Restart

 (you can also add 

Hibernate/Sleep

 to

the menu - see page 

E - 13

). To fully control all the power options (including Hibernate mode) go to the 

Power

Options

 control panel and configure the power button, sleep button and lid to perform the function selected.

Figure E - 11

 - Shut Down/Restart 

Using the Power Button

1.

Go to the 

Start Menu

.

2.

Click the 

Power button

 

.

3.

Select the power state required
from the menu.

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments