manualshive.com logo in svg

Clevo N1X0SD, User Manual, Page: 293 / 336

Share
Download
Clevo N1X0SD User Manual Download Page 293

NVIDIA Video Driver Controls

HDMI Audio Configuration C - 37

C

HDMI Audio Configuration

HDMI (High-Definition Multimedia Interface) carries both 

audio

 and video signals.

In some cases it will be necessary to go to the 

Sound

 control panel and manually

configure the HDMI audio output as per the instructions below.

1.

Go to the 

Control Panel

.

2.

Click 

Sound

 

 (

Hardware and Sound

) and click 

Playback

 (tab)

3.

Depending on your display, the playback device may be selected, however in some 
cases you may need to select the audio device and click 

Set Default

 

(button).

4.

Double-click the device to access

 

the control panel tabs illustrated overleaf.

Volume Adjustment

The sound volume level
can be set using the vol-
ume control in the 

Set-

tings 

menu

 

in the

Charms Bar

.

Figure C - 32

Sound - HDMI 

Device (set Default)

Summary of Contents for N1X0SD

















































































































































































































































































































































Reviews:

No comments