manualshive.com logo in svg

Clevo N130WU, User Manual

Share
Download
Clevo N130WU User Manual Download Page 46

1 - 16 Bottom View

Quick Start Guide

1

Bottom View

Figure 1 - 9

Bottom View

1.

RJ-45 LAN Jack

2.

Vent/Fan Intake/
Outlet

3.

Speakers

Bottom Cover 

Appearance

Note that some design
styles will have a bottom
cover that differs in ap-
pearance slightly form
that pictured here.

Overheating

To prevent your comput-
er from overheating
make sure nothing blocks
the Vent/Fan Intake while
the computer is in use.

Bottom Cover Removal Warning

Do not remove any cover(s) and /or screw(s) for the purposes of device upgrade as this may
violate the terms of your warranty.

If you need to replace/remove the hard disk/RAM/optical device etc., for any reason, please
contact your distributor/supplier for further information.

2

2

1

3

3

Summary of Contents for N130WU

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands