Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
COOK CHILL SYSTEMS
Cook/Chill Systems
SECT.
XIV
PAGE
47
0707
AIR AGITATED
ICE BUILDER
MODELS
:
c
IBC-50
c
IBC-150
c
IBC-250
c
IBC-450
c
IBC-75
c
IBC-175
c
IBC-300
c
IBC-500
c
IBC-100
c
IBC-200
c
IBC-350
c
IBC-600
c
IBC-125
c
IBC-225
c
IBC-400
c
IBC-1000
Cleveland Standard Features
n
Direct expansion ice builder, with externally equalizing
thermostatic expansion valves.
n
For operation with R-22, 404A or R507 refrigerant
(please specify).
n
Liquid and suction headers are provided with single point
connections to the condensing unit.
n
Coils are factory pressure tested, dried using a deep
vacuum, and filled with dry nitrogen at atmospheric
pressure for shipping.
n
For fast, even temperature distribution the water return is
located on the rear of the tank and the chilled water outlet on
the front.
n
Tank is constructed of 1/4" steel plate with angle stiffeners,
and all seams are double welded.
n
2" thick insulation between double plated tank bottom.
n
Tank sides and ends have a 3" polystyrene insulation
between the tank wall and the outer sheathing of stucco
embossed aluminum.
n
Interior of the tank is coated with a zinc dust primer.
n
Standard top 2" insulated covers are sectional, overlapping,
and self-draining.
n
Air blower with removable air distribution pipes, located
between each vertical bank of ice coils, for even ice
build-up and melting.
n
Automatic ice bank control with temperature and
conductivity sensors. Indicates low ice condition.
n
Waterproof control box mounted to outside of tank.
n
Automatic water level control furnished with 3/4" water
solenoid valve.
n
Available in sizes for up to 100,000 lbs. capacity.
n
Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
p
Ice water control panel for location in production area (model
IW-CP).
p
Condensing units for indoor or outdoor installation, air or
water cooled (specify).
p
Water circulating pumps (must be sized by mechanical engi-
neer).
p
Pump package stand with premounted water circulation
pump and air blower, complete with motor starters.
p
Stainless steel evaporator coils.
p
All stainless steel ice builder.
Shall be Cleveland Model IBC-____; ____,000 lbs., capacity
air agitated ICE BUILDER for direct expansion operation;
thermostatic expansion valves; liquid and suction headers
are provided with single point connections to condensing
unit. The coils are factory tested, dried using a deep vacu-
um. Unit includes: Automatic water level control, insulated
covers, ice bank control, liquid line solenoid and air agita-
tion package. Tank is constructed of 1/4" steel plate with
angle stiffeners, 3" polystyrene insulation on sides and
ends, 2" thick insulation on bottom. The exterior is covered
by stucco embossed aluminum panels.
Short Form Specifications
