1333 East 179th St., Cleveland, Ohio, U.S.A. 44110
Ph
: 1-216-481-4900
Fx
: 1-216-481-3782
Web Site
: www.clevelandrange.com
Cleveland Range,
LLC
SINCE 1922
INNOVATIVE STEAM COOKING SOLUTIONS
Cook/Chill Systems
SECT.
XIV
PAGE
5
0403
COOK/CHILL GAS
HORIZONTAL AGITATOR
TILTING MIXER KETTLES
MODELS
:
HA-MKGL-60-TCC
HA-MKGL-80-TCC
HA-MKGL-100-TCC
ITEM NUMBER __________________________________________
JOB NAME / NUMBER __________________________________
Shall be CLEVELAND Model HA-MKGL- ____ -TCC, gas fired,
____ gallon operating capacity, COOK/CHILL, tilting horizontal
agitator mixer kettle,190M BTU High Efficiency Power Burner
heating system, type 316 Stainless Steel for all food contact
surfaces, 50 psi jacket rating, Spring Assist Cover, 3HP Motor
Drive for mixer arm with variable speed control, 3" Air Operated
Piston Draw-off Valve, Flush Mounted Temperature Probe,
Automatic Water Meter for cold water.
NOTE
: Specify remote or kettle mounted cook/chill control panel.
❐
Kettle mounted control center with time/temperature chart
recorder
❐
Dolly for horizontal agitator
❐
Stainless steel bi-fold hinged cover
❐
Electric chain hoist for loading products
❐
Food Strainer (FS)
❐
Kettle Accessory Kit (KAK) includes:
❐
Clean-up Brush (CB)
❐
36" Kettle Paddle (KP)
❐
36" Kettle Whip (KW)
❐
36" Kettle Brush (KB)
❐
Draw-off Brush (DB)
❐
24 oz. Ladle (KL)
❐
Option for propane gas operation (PG)
❐
Voltage option for agitator drive other
than standard 208V/3Ph/60Hz
Short Form Specifications
Cleveland Standard Features
■
Full 60, 80 or 100 gallon working capacity
■
Type 316 stainless steel for all food contact surfaces
■
Precise solid state temperature control
■
Solid state low water safety controls in a plug-in module
■
L.E.D. indicators for heat cycle and low water warning
■
3" diameter air operated flush mounted piston draw-off valve
with variable control (requires air compressor)
■
Flush mounted, easily removable temperature probe
■
Spring assisted, hinged stainless steel cover
■
Three (3) horse power horizontal agitator drive
■
Variable mixer speed control from 5 to 20 r.p.m. with
agitator start/stop controls
■
Spring loaded teflon blades scrape the entire heated
surface area
■
Internal mixing fins for most efficient, uniform mixing of products
■
Easily removable agitator without the use of tools
■
190 M-BTU high efficiency power burner heating system
for fast heat-up and recovery times
■
"Glow type" automatic safety ignition system
■
Power tilt mechanism with case hardened self-locking worm
and segment gear
■
Kettle steam jacket permanently filled with treated distilled water
■
50 psi steam jacket rating and safety valve
■
Front mounted combination pressure-vacuum gauge
■
Heavy duty welded rim bar
■
Hot and cold water kettle filler with 60" hose
■
Standard for Natural Gas operation
■
Standard Electrical for agitator drive is 208V/3Ph/60Hz
■
AGA, CGA, NSF approved
■
Accepted for use in USDA inspected facilities
Note: This COOK-CHILL Mixer Kettle requires a control panel for
operation which must be specified separately
Standard Features for for remote mounted Cook-Chill Kettle Control Panel:
■
Precise, consistent temperature control with digital read-out
■
Time/Temperature chart recorder to provide permanent
record of batch production
■
Automatic water meter for cold water
■
Automatic and manual heating control
■
Built to U.L. specifications
Options & Accessories
❐
Dual remote cook-chill kettle control panel for operating two
HA mixer kettles