Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
COOK CHILL SYSTEMS
Cook/Chill Systems
SECT.
XIV
PAGE
49
0707
AIR COOLED
CONDENSING UNITS
MODELS
:
c
BLH7.5H2
c
BLH25H2
c
JLD50H2*
c
BLH10H2
c
BLH30H2
c
JLD60H2*
c
BLH15H2
c
BLH35H2
c
BLH20H2
c
BLH40H2
*
These units have two (2) compressors
and are not supplied with fused disconnects
Cleveland Standard Features
n
Air cooled condensing unit for outdoor installation
n
For operation with R-22, 404A or R507 refrigerant
(please specify)
n
Liquid line filter with replaceable core and sight glass
n
High efficiency Copeland discus compressor
n
Galvalume weather housing with raised base compressor
n
Thermally protected
n
Permanently lubricated condenser fan motor(s)
n
Access panels for easy servicing of internal components
n
Electrical controls are mounted in control box with hinged
door
n
Receivers include service valves
n
Suction and discharge vibration eliminators
n
180 lbs. head pressure valve
n
Crankcase heater for cold temperature operation
n
Suction filter with replaceable core
n
Suction accumulator
n
Oil separator
n
Low ambient kit
n
Anti short cycle timer
n
Liquid line solenoid valve (shipped loose)
n
Dry contacts for compressor alarm
n
Accepted for use in U.S.D.A. Inspected Facilities
Options & Accessories
p
Water Cooled Condensing Units
p
Larger models available upon request
p
Extended four (4) year compressor warranty
(domestic only)
p
Ice Water Control Panel for location in production area
p
Ice Builders
Shall be CLEVELAND, Model BLH or JLD - ______- H2, Outdoor,
____ HP, AIR COOLED CONDENSING UNIT for Ice Builder.
Weather housing with raised Base Compressor; Receiver with
Discharge and Suction Line Vibration eliminators; Pressure Control;
Drier//Sight Glass Kit; Liquid Line Solenoid Valve; replaceable Core
Suction Line Filter, Suction Line Accumulator; Oil Separator and Oil
Failure Safety Control; Head Pressure Control Valve; Control Panel
with hinged door housing Low Ambient Kit, Compressor Contactor,
and Control Circuit Fusing.
Short Form Specifications
