Cleveland
™
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900
Fax: 1-216-481-3782
Web Site: www.ClevelandRange.com
Email: [email protected]
COOK CHILL SYSTEMS
Cook/Chill Systems
Cleveland Standard Features
I
Electrically powered belt Exiting Conveyor with quick
disconnects for the Air and Electrical hookups for use
with the Cycle-Matic Form-Fill-Seal Machine
I
Air operated raise and lower, loading end of Exiting
Conveyor for various pouch lengths
I
No additional Air or Electric required if used with
Cycle-Matic Form-Fill-Seal Machine
I
All stainless steel construction
I
Frame mounted on (4) 3" diameter lockable swivel
casters
I
18" wide USDA approved polypropylene belt with rub-
ber inserts
I
1/3 Horse power TEFC motor with drive gearbox
I
Variable belt speed controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
I
Exiting Conveyor can operate in either Constant Run or
Timed Run
I
Operator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
I
Emergency stop at Cycle-Matic Form-Fill-Seal Machine
control panel
I
Accepted for use in U.S.D.A. Inspected Facilities
SECT.
XIV
PAGE
33
0907
EXITING CONVEYOR
FOR USE WITH CYCLE-MATIC VERTICAL
FORM-FILL-SEAL MACHINE
MODEL
:
AFF-1150-EC
Shall be CLEVELAND Model AFF-1150-EC EXITING CONVEYOR
with; Air operated raise and lower, loading end of Exiting
Conveyor for various bag lengths; All stainless steel construc-
tion; Frame mounted on (4) 3" diameter lockable swivel casters;
18" wide USDA approved polypropylene belt with rubber inserts;
1/3 Horse power TEFC motor with drive gearbox; Variable belt
speed and Operator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen; Exiting Conveyor can operate in
either Constant Run or Timed Run; Emergency stop at Cycle-
Matic Form-Fill-Seal Machine control panel.
Short Form Specifications
