ZHUM – User Manual
UM_ZHUM_20140422_001_01_00.doc
CLEODE Page 10 of 17
III I
NSTALLATION AND NETWORK ASSOCIATION
III.1 I
NSTALLATION
III.1.1 F
IXING THE CASE BY ADHESIVE
To fix the ZHUM with an adhesive, follow the procedure:
1.
Stick double-sided tape on the back of the box
2.
Remove any dust from the wall by vacuuming or wet cleaning
3.
Once dry, remove the protection of the adhesive and secure the housing at the required
location.
III.1.2 F
IXING THE CASE BY SCREW
To fix the ZHUM using the screw system, follow the following procedure.
Detach the bottom of the case as shown in
the picture.
Mark the position of the holes and drill the
wall taking into account your fixing system
(ankle + screws). Insert the dowels into the
holes previously drilled. Position the
bracket to the ZHUM then tighten the
screws as pictured.
