Cleod9 Wildix W-AIR 150, User Manual

Page: 1 / 2

User Guide
W-AIR 150
Local contacts
Add a contact to local phonebook
1. Press Menu key and select Contacts
2. Press More Soft key -> Add contact
3. Fill in the fields, when ready, press Save Soft key .
Assign a speed dial number to a local contact:
1.
In Contacts, select a contact that you wish to assign a speed
dial number to
2.
Select More -> Speed dial
3.
Select a speed dial number (from 2 to 9) that you wish to assign
to the selected contact
4.
Press Add Soft key.
Make a call
Manually: enter the number from idle and press the green O ff -hook
key.
Dial a speed dial number: make a long press (>2 seconds) from idle
on the speed dial key (from 2 to 9) assigned to the contact.
Call from call history:
1. Press
Menu key and select Call list
2. Select a call from the list
3. Press the green
O ff -hook key
Call from shared company phonebooks
1. Press
Menu key and select Central directory
2. Press Search Soft key
3. Enter the number or the name and press Selection key
4. Select a contact that you wish to call (in case a contact has
several phone numbers, a green arrow in displayed near the
contact; use
Navigation keys to select the phone number)
5. Press the green O ff -hook key
Shared company phonebooks must be set up by user via
Collaboration or by the PBX administrator.
Adjust volume, enable speaker, mute the microphone
Mute the microphone: press Mute key during a call.
Adjust the volume: press Volume Up / Down keys during a call.
Turn on the Speaker mode: press the Speaker key during a call.
Press the key to answer a ringing call in Speaker mode.
Push to talk (PTT)
Press Menu key, select Settings -> PTT -> On to enable the
feature. Press and hold Mute key and say your message. Your
message is transmitted to other W-AIR 100/150 handsets in the
network.
Hold / Second call
Press Hold Soft key during a call to put a call on hold.
Second call: enter the number to call or press Selection key to
access
Contacts
or
Central directory
, then press the green O ff -
hook key.
Swap: when you have one active call and one call on hold, press
Swap Soft key to swap between them.
Note: this device supports up to two active calls / lines.
Call transfer
Blind transfer (the desired party/extension is not notified of the
impending transfer)
1. Press
Transfer Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in
Contacts
or
Central directory
3. Press Transfer Soft key.
Attended transfer (the desired party/extension is notified)
1. Press Transfer Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in Contacts
or Central directory
3. Press the green O ff -hook key
4. Press Transfer Soft key to transfer the call.
Conference call
1. Press Conf . Soft key during a call (the call is put on hold)
2. Enter the number or press Selection key to search in
Contacts
or
Central directory
3. Press the green O ff -hook key
4. When the third party answers, press Conf, Soft key.
Access Voicemail
Press Voicemail key (Key 1) and hold it for at least 2 seconds to
access Voicemail and follow the audio prompts.
Phone and audio settings
• For Language settings, LED signal, Power save, Auto-answer,
Vibration settings: press
Menu key and select Settings .
• For Ring volume, Ring melody, Key sound, Coverage warning,
Charger warning, Bluetooth and other audio settings: press
Menu key and select Audio settings .
• To set Alarm clock: press Menu key and select Alarm clock .