Clemco Pulsar II, Owner'S Manual

Page: 14 / 30

14
4.7.5 Dust collector cartridge cleaning / replacement of cartridge
(1) Empty the dust container
- Disconnect electrical (red switch) supply und pull
the plug, in order to interrupt the backlash pulse
- Unscrew the dust container and empty the content
in the special disposal container
- Attention! If there were blasted hazardous or
insalubrious materials, the dust should be
disposed as hazardous waste!
(2) Dismounting the filter cartridge
- Disconnect air supply
- Take off the fan housing
- Unscrew the screw on the flange of the filter car-
tridge and take out the filter cartridge.
(3) Mounting the filter cartridge
- Clean all reusable parts
- Put in a new filter cartridge and fasten
- Put on filter housing and fix with clamps
- Clean dust drum
4.7.6 Window Replacement
Figure 7 Filler strip
Nr. Description
1 Filler strip
2 Molding
3 Place for filler strip
4 Cabinet wall (fits into narow slit)
5 Window tool
6 Filler strip
7 Window (fits into the expanded slit)