Apex Tool Group
P2544PM | 2021-02
29
3
EN
3.7.8
Allowing a Linking group/FastApp selection
>
Fig. 3-22: Submenu – Allowing a Linking group/FastApp selection
3.8
Diagnostics
Various test functions can be found in
Diagnostics
.
Fig. 3-23: Menu – Diagnostics
Button
Description
Lock activated.
Requirement: A PIN must be activated.
To switch to another Linking group/FastApp from the run screen, a PIN must be
entered. The functionality of the Start switch is not restricted.
Lock disabled.
Switching between all the parameterized Linking groups/FastApps can be carried out
in the run screen. There is no need to enter a PIN.
Warning
Movable parts!
Never reach into the rotating parts of the tool.
Make sure that the rotation of the tool does not pose any danger.
Do not perform diagnostic tests on the workpiece - only with a freely rotating tool.
Button
Description
1 Speed test
Angle test