Apex Tool Group
P2398PM |
2019-12
9
Menus and Functions
3
EN
3
Menus and Functions
3.1
General functions
3.1.1
Switching on
To switch on the tool, press the Start switch.
3.1.2
Switching off
There are several ways to switch off the tool.
Option 1:
Remove the battery.
→
Tool switches off after 20 seconds.
Option 2:
1. Navigate to
Switching the tool off
:
>
>
2. Press the
button.
→
The
symbol is displayed on the LCD.
→
After five seconds, the tool switches off.
Option 3:
The tool will switch off if it is not used for a certain time. See 3.7.4 Setting the shut-off properties, page 27.
3.1.3
Selecting a button
When talking about pressing a button in this manual, this means the following:
1. Use the arrow buttons to navigate to the desired button (outlined in blue).
2. Press the
button.
3.1.4
Changing parameters
1. Press the
button.
2. Change the number using the arrow buttons.
3. Confirm with the
button.
3.1.5
Change between FastApps/mPro mode
1. Select
>
>
.
2. Press the
button to switch between modes:
FastApps mode is activated.
mPro mode is activated. A connection to the controller is necessary, see document P2402KA.
Summary of Contents for CellCore CCBA
Page 65: ......
