CleaverBrooks ADAC 1000, Operation Manual

Page: 80 / 140

Chapter 4 — Operation
4-6 Part No. 750-386
4.1.6 - Transfer Pump Control
Information and controls on this screen are similar to Feed Pump
Control above.
4.2-Remote Monitoring
The PanelView Plus HMI provides Web Server functionality, allowing
for easy access to plant floor HMI applications. There is no need to
install any additional Rockwell software on the browser computer.
Once you have an Ethernet connection between a computer and the
PanelView Plus terminal, simply choose a web browser such as
Internet Explorer or Google Chrome and type in the IP address of the
HMI running the application you wish to view. Note there can only be
one connection to an HMI at a time.
4.3-Alarms
4.3.1 - Alarm Bell
The alarm bell will appear when an active
Alarm or Warning is present.
The alarm bell can be in one of four states:
• Yellow Flashing = Warning and alarm not
silenced
• Yellow Solid= Warning and alarm silenced
• Red Flashing = Fault and alarm not silenced
• Red Solid= Fault and alarm silenced
To access alarm details press <Alarms> on the Main Screen.
Figure 4-6 Transfer Pump Control Screen