ClearView Panther-16HP Quick Start Manual Download

Page: 14 / 270

Figure 2-2

2.3

Preview

After you logged in, the system is in live viewing mode by default. You can see system date, time

and channel name. If you want to change system date and time, you can refer to general settings

(Main Menu->Setting->System->General). If you want to modify the channel name, please refer

to the display settings (Main Menu->Setting->Camera->CAM Name)

Tips



Preview drag: If you want to change position of channel 1 and channel 4 when you are

previewing, you can left click mouse in the channel 1 and then drag to channel 4,

release mouse you can switch channel 1 and channel 4 positions.



Use mouse middle button to control window split: You can use mouse middle button to

switch window split amount.

Preview Control

The preview control function has the following features.



Support preview playback.



In the preview desktop, system can playback previous 5-60 minutes record of

current channel. Please go to the Main Menu->Setting->->System->General to set

real-time playback time.



Support drag and play function. You can use your mouse to select any playback

start time.



Support playback, pause and exit function.



Right now, system does not support slow playback and backward playback function.



Support digital zoom function.



Support real-time backup function.

You can follow the contents listed below for the operation instruction.

Preview control interface

Recording status

Video loss

Motion detection

Camera lock

Summary of Contents for Panther-16HP















































































































































































































































































Search results

Summary of Contents for Panther-16HP

Reviews:

Related manuals for Panther-16HP

Brands by name

Popular brands

ClearView Panther-16HP, Quick Start Manual

Search results

Summary of Contents for Panther-16HP

Reviews:

Related manuals for Panther-16HP

Brands by name

Popular brands