76
Parameter
Note
Abandoned/Missing
Can detect if there is any object abandoned/missing in the set forbidden zone
in the video, trigger alarm according to the judgment
Scene Change
Can be used to detect if there is any change to the video scene, trigger alarm
according to the judgment.
Enable
Check to enable corresponding IVS function.
Action
Only supported by Intrusion. There are two options for action: cross, appear.
Direction
For “Tripwire”, it is to set the direction of warning line, you can select A->B,
B->A, and A<->B.
For the “Cross” in the “Intrusion”, it is to set the direction of cross, you can
select enter, leave and enter&leave.
Rule Type
Only supported by “Abandoned/Missing”, you can select object abandoned and
missing.
Draw Rule
Check enable and click draw, and draw the rule with corresponding function in
the monitoring image. Click clear to delete the rule which has been drawn.
Min Keep Time
For the “Enter the area” in the “Detect Action List”, set the min time between
the target box appears in the area and trigger alarm.
Target Filter
Check enable, click “Draw”, and you can draw the size model of filter target for
the rule in the scene; click “Clear” to delete all the target filter models which
have been drawn.
Note:
Please refer to chapter 5.3.1 Video Detect for other parameters.
5.3.4 Face Detect
Figure 5-52
Summary of Contents for IP-93A
