COLLABORATE CONFERENCE CONTROLLER User Guide
Page
12
2.2.7 About MCU (Multi-point Control Unit)
The embedded MCU is an optional feature. It enables the simultaneous connection of
up to 9 endpoints from various locations. The 9 endpoints include the host system
and 8 other endpoints.
Note:
Before you use the MCU, verify the licensing capabilities of your system.
To do so, from the Home screen, click Remote Control, and then select Device
Info.
of this manual shows this screen.
2.2.8 MCU Layout
Note:
You
cannot
change the MCU layout when recording during a
conference.
2.2.8.1 Auto
The system automatically changes the layout as follows:
Number of
Participants
Layout
Layout Description
4 or less
2 x 2
Four equal-sized rectangles.
Each contains an image. If more than 4 endpoints are in
the call that use this layout, the dominant speaker
appears and replaces an image of a non-dominant
speaker.
5 or 6
5 + 1
Six rectangles.
One is larger than the others: it contains the image of
the dominant speaker
7 to 9
3 x 3
Nine equal-sized rectangles.
Each contains an image of a participant.
2.2.8.2 Voice Switching
COLLABORATE Live displays the video stream of the dominant speaker.
2.2.9 MCU Answer Mode
The following options are available for the second and subsequent calls:
Accept All:
Automatically accept incoming calls
Summary of Contents for COLLABORATE Live Conference Controller
Page 8: ...COLLABORATE CONFERENCE CONTROLLER User Guide Page 8 Back to Table of Contents ...
Page 37: ...COLLABORATE CONFERENCE CONTROLLER User Guide Page 37 Back to Table of Contents ...
Page 59: ...COLLABORATE CONFERENCE CONTROLLER User Guide Page 59 Back to Table of Contents ...
Page 67: ...COLLABORATE CONFERENCE CONTROLLER User Guide Page 67 Back to Table of Contents ...