Clearly Superior Technologies Trackball manual
Place the Maxyz
disk in the drive and click on the “Start Menu” “Run” option. In the dialog box enter “a:
\maxsetup.exe” and press <ENTER>. Now follow the on-screen instructions to complete the installation. After
installation, notice the blue, yellow and red icon in the system tray on the Task Bar. Click
on this icon to activate the
software menu, which includes on-line help.
Caring For Your Trackball
PC-Trac and MicroTrac are generally self cleaning units. As the ball rolls, dirt and dust are scrapped off by the three
rollers and dropped to the bottom of the case.
IF the Trackball feels rough, try rolling the ball VERY FAST in several different directions. This will normally eject
particles from the roller surfaces and restore the smooth feel of the PC-Tech Trackball.
If the procedure above fails to restore smooth operation and you feel that your cursor movement is skipping because
of dirt and you want to clean it by hand, follow these easy steps:
First, shut your computer down and unplug the trackball!
PC-Trac
1.
Take out the three screws found on the bottom of the trackball unit.
2.
Lift off the top of the trackball unit.
3.
Remove ball from inside. Use a clean cloth and a small amount of 98%
Isopropyl (rubbing) alcohol to clean the ball.
4.
Rub the cloth over the three rollers that the ball sits on, to remove any
dirt.
5.
Remove any dirt that has collected on the bottom of the case. Place the ball into its original position.
Replace the top cover and tighten the three screws.
MicroTrac
You can easily remove the ball if you want to clean the MicroTrac or replace the ball. To remove the ball:
1.
Turn the ring that holds the ball clockwise until the ring is loose.
2.
Lift the ring out; then lift the ball out.
file:///Z|/CD/PC-Trac/Manual.htm (4 of 7)3/2/2009 11:42:24 AM
