HOTSPOT
TO GO
QUICK START GUIDE
Power on your CLEAR Spot Voyager by pressing and
holding the power button (button on the left side
“PWR”) until you see 4G LED lights come on.
When the 4G LED lights stop flashing, your CLEAR
Spot Voyager is ready to connect any wi-fi-enabled
device. Connect your Spot to your PC or Mac device
using the Wi-Fi Network Name (SSID) and Wi-Fi
Default Password located on the back of your Spot.
On your computer, open the Wireless Network
Connection located at the bottom right-hand corner
of your computer screen. Select the Wi-Fi network
name of your device and enter the Wi-Fi password
when prompted. That’s it! You are now ready to start
browsing the web.
CHECK OUT OUR COVERAGE MAP @
www.clear.com/coverage
