7 Pentz EF5 Installation Guide
© Clear Vue Cyclones 2018
Shipment Contents
•
Leeson Motor – single phase or three phase
•
16” Impeller with taper lock bushing
•
16” Blower Housing with Motor Plate
•
¼” Neoprene Gasket
•
Upper Cylinder
•
Cone
•
Intake Transition – 6” or 8”
(will be mounted to intake on Upper Cylinder)
•
18” Clamp
•
6” Flex Hose – 6” length
•
(2) 6” flex hose clamps
•
Steel Drum with Lid & Collar – 30-gallon or 55-gallon
•
Wall Bracket (for wall-mounted systems only)
•
Backer Board (for wall-mounted systems only)
•
Metal Stand (for stand-mounted systems only:
o
(1) Upper frame
o
(4) Upper legs
o
(1) Center frame
o
(4) Lower legs
•
8” Flex Hose – 5’ length
•
(2) 8” Flex Hose Clamps
•
(2) NANO Cartridge Filters –
filtered systems only
•
Filter Flange with Collar –
filtered systems only
•
Filter Clamp with Hardware –
filtered systems only
o
(1) band clamp
o
(1) ¼”-20 x 1” bolt
o
(1) ¼”-20 flat washer
o
(1) ¼”-20 wing nut
•
Filter Clean Out Box –
filtered systems only
•
Electrical Box with Remote –
single phase systems only
•
Hardware Kit:
Single Phase Hardware Kit
Three Phase Hardware Kit
o
(12) ¼"-20 x 1" Hex Bolts
o
(14) ¼" Split Lock Washers
o
(16) ¼" Flat Washers
o
(4)
3
/
8
"-16 x ¾" Hex Bolts
o
(4)
3
/
8
" Flat Washers
o
(4)
3
/
8
" Lock Washers
o
(4) #6 x 1-¼" Sheet Rock Screws
o
(6)
5
/
16
"-9 x 3" Hex Head Lag Screws
o
(10)
5
/
16
" Flat Washers
o
(4)
5
/
16
"-9 x 4" Hex Head Lag Screws
o
(4) ¼"-20 x 2" Hex Bolts
o
(2) ¼"-20 Nuts
o
(12) ¼"-20 x 1" Hex Bolts
o
(14) ¼" Split Lock Washers
o
(16) ¼" Flat Washers
o
(4) ½"-13 x 1" Hex Bolts
o
(4) ½" Flat Washers
o
(4) ½" Lock Washers
o
(4) #6 x 1-¼" Sheet Rock Screws
o
(6)
5
/
16
"-9 x 3" Hex Head Lag Screws
o
(10)
5
/
16
" Flat Washer
o
(4)
5
/
16
"-9 x 4" Hex Head Lag Screws
o
(4) ¼"-20 x 2" Hex Bolts
o
(2) ¼"-20 Nuts
Check the contents of your shipment as soon as possible to verify there
was no damage sustained during transit. If there are any issues, please
contact Customer Service at 888-299-0221.