Eclipse
|
Upgrade Guide
Page 147
11
Upgrading E-MADI64 cards
This chapter describes how to upgrade MK1 E-MADI64 cards. The following E-MADI64
code can be upgraded:
•
The
boot code
file (
*.mot
), which is upgraded using the Renesas Flash Development Toolkit
3.4 Basic (FDT).
•
The
application code
and
DSP code files
(
*.fwc
), which are upgraded using EHX.
•
The
FPGA code
, which is upgraded using
either
EHX or Xilinx iMPACT programming
software.
Note:
This guide is laid out in the order in which you must upgrade your Eclipse HX software
and hardware devices. For a quick reference to upgrading your system, see
Quick reference: Upgrading to Eclipse HX
11.1
Identifying MK1 and MK2 E-MADI64 cards
Note: this chapter only describes how to update MK1 E-MADI64 cards.
To identify the E-MADI64 card as a MK1 or a MK2 card, run a firmware report in EHX. To
use the Firmware report tool:
a.
Go to
EHX> System> Layout
.
b.
Right click the matrix icon.
c.
Select
Firmware > Firmware report.
You can also identify MK 1 and MK 2 cards visually.