Eclipse
|
Upgrade Guide
Page 145
10
Upgrading IVC-32 and LMC-64 cards
To upgrade IVC-32 and LMC-64 cards, follow the
same
upgrade procedures for E-QUE
At EHX v9.1, the application code for all 3 cards (E-QUE, IVC-32 and LMC-64 cards) is
the
same
.
Note:
This guide is laid out in the order in which you must upgrade your Eclipse HX software
and hardware devices. For a quick reference to upgrading your system, see
reference: Upgrading to Eclipse HX
10.1
Identifying MK1 and MK2 IVC-32 / LMC-64 cards
To find out if the IVC-32 / LMC-64 card is either a MK 1 or a MK 2 card, run a firmware
report in EHX. The firmware report identifies the card as either a MK 1 or a MK 2 card.
To use the Firmware report tool:
a.
Go to
EHX> System> Layout
.
b.
Right click the matrix icon.
c.
Select
Firmware > Firmware report.
You can also identify MK1 and MK2 cards
visually
.
The MK1 IVC-32/LMC-64 card is
green
. It features a large chip in the upper right hand
corner of the PCB (as it is installed in the matrix):
Figure 10-1: IVC-32/LMC-64 MK1 card detail
The MK2 IVC-32/LMC-64 card is
blue
. If you look at the upper right hand corner of the
card, the large chip
no longer
forms part of the PCB:
