Clear-Com CELLCOM 10 Page 96 Instruction Manual Download

Page: 96 / 168

Vitec Group Communications

CellCom-10 Instruction Manual

7 - 4

• The Pushbutton menu showing the Exit (to the main programming

menu) option selected.

THE ALARM OPTIONS MENU

This is the Alarm menu for determining whether the low battery and/or
low signal strength warnings should sound in the headphone.

This menu is reached by selecting the Alarm option on the main
programming menu.

To return to the main programming menu, select Exit (the Up arrow on
the display) and press pushbutton C.

• The Alarm menu showing the low battery warning option selected.

• Press button C to select the low battery alarm menu and use the

scroll buttons to switch between the low battery alarm settings.

• The Alarm menu showing the low signal strength warning option

selected.

• Press button C to select the low signal alarm menu and use the scroll

buttons to switch between the low signal alarm settings.

• The Alarm menu showing the Vibrate option selected (Type II

beltpacks only).

• Press button C to select the vibrate alert menu and use the scroll

buttons to switch between the vibrate alert settings.

Summary of Contents for CELLCOM 10









































































































































































Search results

Summary of Contents for CELLCOM 10

Reviews:

Related manuals for CELLCOM 10

Brands by name

Popular brands

Clear-Com CELLCOM 10, Instruction Manual

Search results

Summary of Contents for CELLCOM 10

Reviews:

Related manuals for CELLCOM 10

Brands by name

Popular brands