manualshive.com logo in svg

Clear-Com CELLCOM 10, Instruction Manual

Share
Download
Clear-Com CELLCOM 10 Instruction Manual Download Page 95

Vitec Group Communications
CellCom-10 Instruction Manual

7 - 3

THE KEY OPTIONS MENU

This is the Key menu for programming the key assignments and how 
the pushbuttons behave on the Beltpack.

Note: These features are not operational on CellCom-10 systems.

This menu is reached by selecting the Page option on the main 
programming menu. To return to the main programming menu, select 
Exit (the Up arrow on the display) and press pushbutton C.

• The Pushbutton menu showing the Assign Route to a Key option 

selected.

• The Pushbutton menu showing the Key Latch / Nonlatch functions 

option selected.

• The Pushbutton menu showing the Talk / Listen setup option 

selected.

• The Pushbutton menu showing the option to Delete a Key 

Assignment Route.

• The Pushbutton menu showing the Page Selection option selected.

Summary of Contents for CELLCOM 10









































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands