Clear-Com CELLCOM 10, Instruction Manual

Page: 149 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 1 1 - 9
There is no way of examining the contents of the configuration file
using this program, so the user should choose a filename which helps
to remember what the contents are. Make sure that the file is saved
with a “.map” extension.
The configuration of the base station has now been backed up.
RESTORING A CONFIGURATION TO THE BASE STA-
TION
Press the Send button. A dialog box will pop up asking the user to
select a configuration file to send.
Figure 11-13: Restoring a Configuration File
Select a file, then press Open. The program will ask for confirmation to
overwrite the configuration in the base station.
Figure 11-14: Confirm New Configuration
Click Yes.
If the program cannot communicate with the base station, an error
dialog will be shown. If this occurs, check the PC serial port is correct,
make sure a Null Modem cable is being used, and check the PC and
base station connections.