Clear-Com CELLCOM 10, Instruction Manual

Page: 133 / 168

Vitec Group Communications
CellCom-10 Instruction Manual 1 0 - 5
Figure 10-7: Beltpack Overview
DECT CARRIERS
This shows the range of RF carriers that the base unit is currently
using, in MHz. The carriers that a unit is permitted to use vary from
country to country. Authorized service personnel and distributors may
change this value after entering a password - contact ClearCom sales
for details.
SYS ID
This shows part of the DECT system ID, which the beltpacks use to
identify which base unit to communicate with, and vice versa.
ASSIGNING BELTPACK KEYS
The program can be used to assign the destinations of each of the six
(three pages of two) soft assignments of the beltpack talk keys.
The drop-down box is used to select the call destinations.
THE REPLY KEY
The key in the centre of the face of the beltpack is known as the reply
key. The configuration of this key is the same across all three pages of
the beltpack. It can be configured in the following ways:
• As a reply key: Selecting REPLY from the drop-down box next to
the "Reply key" text configures the key as a standard reply key.
When anyone calls this beltpack, the centre LEDs will flash and
the label of the caller will appear in the display above the centre
key. The beltpack user can reply to the call by pushing the centre
key.
• Assigning a call destination: Pushing the centre key on any page
will call this destination. For example, if "STGAN" is selected from