Clear-Com 4000 series II, Technical Manual, Page: 7 / 134

4000 Digital Series
II
Issue 2.1 Technical Manual
STA0381 Page v
Policy Statement
Vitec Group Communications has a policy of continuous improvement of both products and
documentation and reserves the right modify product specifications and characteristics without notice,
at any time.
Vitec Group Communications has endeavoured to ensure that information, details and descriptions set
out in this document are correct at the time of publication. Where alterations have been made to the
product, we will endeavour to produce appropriate additional information such as supplementary
documents, changes to the website or re-issued copies of a CDROM.
Vitec Group Communications is, however, unable to guarantee that no changes have taken place to the
specification or characteristics of this product after the publication of this document. Vitec Group
Communications shall not be liable for any loss or damage whatsoever arising from the use of any
information, errors or omissions in this document or any use of the product.
Vitec Group Communications declares that the electronic equipment has been manufactured in
conformity with the following standards:
Trademarks
MS-DOS and Windows are registered trademarks of Microsoft Corporation.
Ethernet is a registered trademark of Xerox Corporation.
© 2006 All rights reserved. Neither the whole, nor any part of the information contained herein, nor in
the products described in this guide, may be adapted or reproduced in any material form except with the
prior written approval of Vitec Group Communications.
European Union Declaration of
Conformity
BS EN 50081-1:1992 Electromagnetic compatibility. Generic
emission standard.
Residential, commercial and light industry.
BS EN 50082-1:1998 Electromagnetic compatibility. Generic
immunity standard.
Residential, commercial and light industry.
BS EN 60950:1992 Safety of information technology equipment.