EN 42
ERR6
The motor of the roller brush is
overloaded.
Switch the device off and wait
at least 30 minutes before you
reactivate the device and use
it again.
ERR7
The dust bin is not properly
inserted in the dust compartment.
Open the dust compartment
and correct the position of the
dust bin.
ERR8
Malfunction of the sensor detection
for avoiding collisions.
Clean the sensors on the
bottom side of the device
(see chapter “Cleaning and
maintenance”).
ERR9
Both wheels are no longer
touching the
fl
oor.
Lift the device up and set it
down somewhere else on the
fl
oor. If necessary, remove the
obstruction.
ERR10
The sensors on the front and back
are no longer in contact with the
ground.
Lift the device up and set it
down somewhere else on the
fl
oor.
Technical data
Device
Model number:
VR-101A
Product number:
Z 06025
Diameter: 33
cm
Height:
9
cm
Rechargeable battery: 14.4 V; Li-Ion
Capacity of the
rechargeable battery: 2200 mAh
Rechargeable battery
charging time:
4 – 9 hours
Operating time:
approx. 100 minutes on hard
fl
oors
approx. 25 minutes on carpeting
Voltage supply
–
charging station: 18.0 V DC, 1.5 A
–
the remote control: 3 V DC (2 x 1.5 V batteries, type AAA)
Mains adapter
Model number:
HYCH0301801500G
Voltage supply:
100 – 240 V~ 50 / 60 Hz
Safety class:
II
Customer service/
importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
*) Calls subject to a charge.
06025_DE-GB-FR-NL_A5_V5.indb 42
06025_DE-GB-FR-NL_A5_V5.indb 42
24.04.2015 10:12:26
24.04.2015 10:12:26
