EN 38
Cleaning and maintenance
ATTENTION!
• The device may not be connected to the mains and must be completely
switched off for cleaning and maintenance!
• Only the dust bin may be rinsed out. The device itself, the
fi
lters or the remote
control may not be immersed in water or in other liquids. Make sure that all
parts are completely dry before you place the dust bin back in the device!
• None of the parts of the robotic vacuum cleaner are suitable for cleaning in
the washing machine or dishwasher!
• When cleaning, do not use any corrosive or abrasive cleaners. They could
damage the surface.
Before and after each use, make sure that
• the nozzle and the vents are unobstructed,
• the sensors on the bottom side of the device are free of dust or similar,
• the side brushes are not entangled and are free of hair and threads,
• no hair, threads or similar are wrapped around the roller brush or wheels.
The side brushes may be cleaned with warm water.
Cleaning the housing
If necessary, wipe the housing off with a damp cloth only.
Emptying the dust bin and cleaning the dust
fi
lter
For proper operation of the device, you should empty the dust bin and clean the
fi
lters after every use.
• You can knock out the
fi
lters and/or use the enclosed cleaning brush to
brush them out.
• You can rinse the dust bin out with water.
1. Depress the release button (
2
) on
the device to let the cover
fl
ip up.
2. Pull the dust bin out on the
handle.
3. Open the dust bin by folding the
catch forward and pushing it up.
4. Empty the dust bin into a waste bin.
5. You should also clean the HEPA
and dust
fi
lter after every use.
They are located on the front side
of the dust bin.
06025_DE-GB-FR-NL_A5_V5.indb 38
06025_DE-GB-FR-NL_A5_V5.indb 38
24.04.2015 10:12:25
24.04.2015 10:12:25
