24
Assembling the Device
CAUTION!
❐
Danger of electric shock! During assembly and dismantling, the device must not be connected
to the mains power and must have been cooled down.
1. Lay out all accessory parts carefully on a
fl
at
fl
oor. To be on the safe side, place a protective
fi
lm
underneath the parts to prevent any damage to delicate surfaces.
Use As Floor Cleaner
2. Push the handle into the middle rod part I. If necessary, press the
locking lug of the handle end piece so that is
fi
ts into the handle
rod. The locking lug must engage in the opening in the rod. Rotate
the handle back and forth to achieve this. To detach the handle,
press the locking lug (A) and as you do this pull out the handle.
3. Push the central rod part 1 into the bottom rod part 2. The rod
must be heard to engage in place. To detach the rod, press the
locking lug on the rod and as you do so pull the rod out.
4. Insert the end of the handle rod into the upper opening of the
main unit. The rod must be heard to engage in place. To detach the
rod, press the locking lug on the back of the rod (C) and as you
do so pull the rod out.
A
B
C