EN
16
•
Detaching:
Pull the tab on the top of the attachment forwards and remove the at-
tachment (
Picture A
).
Filling the Water Tank
PLEASE NOTE!
■
Never pour any descaling or cleaning agent or other chemical additives into the water
tank. This may destroy the device and safe working is no longer guaranteed.
■
Pour no more than 350 ml of water into the water tank.
• Water residues in the water tank are attributable to the fact that this device
has been tested and do not constitute a defect
.
• The device can be operated with tap water or distilled water. However, if you
use tap water, the device will need to be regularly descaled (see the “Clean-
ing and Storage” chapter – “Descaling”).
1. Fill the measuring cup (
A
) up to the
MAX
marking with water.
2. Pull the water tank cap (in the bottom) out of the water tank (
C
). Please note that it
cannot be completely detached.
3. Carefully pour the water from the measuring cup into the water tank (note the
MAX
marking).
4. Place the water tank cap back into the opening. Make sure that the water tank is
fi
rmly sealed shut.
Use
PLEASE NOTE!
■
CAUTION – Danger of Scalding!
The water tank cap must not be opened during use.
■
The device must be placed down on a stable, water-resistant and heat-resistant sur-
face. Do not turn the hot device upside down or place it on its side. Hot water could
run out.
■
Only use the device in places where heat and moisture cannot cause any damage.
Never use in front of surfaces made from glass or plastic.
■
Before using the device, read the care instructions for the fabric which is to be
smoothed. Some fabrics, leather and suede as well as fabrics with
fl
ounces,
sequins and appliqués must not be steamed!
■
Always test the device
fi
rst on a small, inconspicuous spot on the clothing.
■
Do not iron over zips, studs, clips etc. to prevent any scratching of the steam bottom.
■
Never use the device without water
to prevent damage to the device!
1. Hang up the hanger containing the item of clothing in such a way that there is plenty
of space around the item of clothing which is to be smoothed. It must not come into
contact with other items of clothing, objects, people or animals.
2. Attach the attachment you want (see the “Attaching / Detaching Attachments” chapter).
3. Pour water into the water tank (
C
) (see the “Filling the Water Tank” chapter).
02979_inlay_DE-EN-FR-NL_A5_V1.indb 16
02979_inlay_DE-EN-FR-NL_A5_V1.indb 16
19.11.2019 12:02:42
19.11.2019 12:02:42
