EN
16
Device Overview
12
1
4
5
8
3
9
2
11
10
6
7
1
On / O
ff
button
2
Telescopic tube
3
Telescopic tube mount
4
Charging socket (on the back)
5
Main unit with water tank
6
Cleaning feet with mop pads
7
Spray nozzle
8
Control lamp
9
Water tank cap
10
Slider for adjusting the length
11
Handle
12
Spray button
Before Initial Use
• Remove
any
possible
fi
lms, stickers or transport protection from the device.
Never
remove the rating plate and any possible warnings!
• Assemble the device (see the “Assembling the Device” chapter).
• Charge up the battery (see the “Charging Up the Battery” chapter).
Assembling the Device
1. Guide the connecting cable of the handle (
11
) fully through the telescopic tube (
2
).
2. Plug the handle onto the top of the telescopic tube. It must engage audibly.
3. Connect the plug connector of the connecting cable to the socket of the main unit (
5
).
It must engage audibly.
4. Plug the telescopic tube into the telescopic tube mount (
3
) of the main unit. It must
engage audibly.
To detach the telescopic tube or handle, in each case press the corresponding release
buttons and pull out the respective part.
NOTICE:
When you take it apart, it is essential
to ensure that the plug connector of the connecting cable is disconnected.
