EN
22
4. Move the On / Off switch (
13
) to position
I.
Steam begins to emerge from the
attachment.
5. Allow the attachment to glide slowly over the surface to be cleaned.
6. After use, move the On / Off switch to position
0
and pull the mains plug out of the
plug socket.
After Use
1. If necessary, pull the water tank (
11
) out of the main unit (
5
) and empty it fully after
each use.
2. Allow the device and accessories to cool down completely and then clean them.
Cleaning and Storage
Cleaning the Device
PLEASE NOTE!
■
Do not use any solvents, aggressive cleaning agents or cleaning pads for cleaning.
They could damage the device.
■
The attachments are not machine-washable, dishwasher-safe or suitable for tumble
drying! Only ever allow them to dry in the air!
• Wash
the
fl
oor cloth (
15
) and / or the micro
fi
bre cloth (
17
) in accordance with the
instructions on the washing label.
Do not use any fabric softener or bleach! Wash
separately or with the same colours!
• Rinse the attachments with lukewarm water and a mild cleaning agent if necessary.
Allow them to dry in the air.
• Wipe down the main unit (
5
), handle rod (
3
) and the cleaning foot (
9
) with a soft,
slightly damp cloth if necessary and then dry with a soft cloth.
Storing the Device
• Turn up the upper hook for winding up the cable (
2
) and wind the mains cable around
the upper hook and lower hook.
• To quickly unwind the mains cable again, turn down the upper hook for winding up
the cable.
• You should store the device in a cool, dry place which is out of the reach of children
and animals.
• Before you use the device again, always check the water tank (
11
) for residual water,
and completely empty it if necessary.
01123_01345_Inlay_DE-EN-FR-NL_A5_V2.indb 22
01123_01345_Inlay_DE-EN-FR-NL_A5_V2.indb 22
22.05.2019 10:03:16
22.05.2019 10:03:16
