Pro Ox 5900-BT-AIR Installation & Startup Guide
Page 12
www.cleanwaterstore.com
Rev. 02-26-2020
External Drain Line Flow Control (“DLFC”)
If you bought a 1.5 or 2.0 cubic foot Pro-OX 5900-BT Filter
you will get an external Drain Line Flow control with your
order. This is made up of three pieces: a 1” x ¾” Adapter,
the DLFC, and two hose barb fittings.
Assemble the 3 parts using Teflon tape, making sure the flow arrow is facing the right
direction. This can go anywhere in the drain line run, even at the end. Clamp it to a wall.
Program Time of Day and Days Between Backwashes
1.
Enter main menu, by pressing the Menu/Enter button (Time of
day will flash)
2.
Set time of day by pressing the Set/Change button (First digit
will begin to flash)
3.
While scrolling through numbers, it increases value.
4.
To decrease the value, you will have to “go all the way around” to a lower value.
5.
To change digit value, press the Set/Change button
6.
To accept the digit, press the Menu/Enter button
7.
With all digits flashing press the Menu Button to set A.M. or P.M.
8.
Once A.M./P.M. is accepted the next menu item will flash
9.
Set Days Between Backwash: Press Menu / Enter Button. This display is used to set the
maximum amount of time (in days) the unit can be in service without a backwash.
This
option setting is identified by the letter ‘A’ in the left digit.
Backwash will begin at the
set Backwash Time. Example:
Backwash every 4 days ( A - 04 )
10.
To Set Regeneration Frequency Press the Set/Change Button
