Repair or Warranty Contact
Clayton Associates, Inc. • 1650 Oak Street • Lakewood, New Jersey 08701 • P.+1-732-363-2100 F.+1-732-364-6084
WH-1xxG
Page 5
1. Unbox the vacuum tank.
2. Visually inspect vacuum tank to ensure that no parts are missing or damaged.
3. Remove items shipped in the vacuum tank.
4. Attach the Handle [603-115G].
•
Remove the 4 screws from the handle slots on both sides of the vacuum tank using a 1/2 in socket or open end wrench.
• Slide the handle into the handle slots on the side of the vacuum tank.
•
Insert the screws through the holes in the handle and into vacuum tank; finger tighten until all 4 screws are started.
•
Tighten using a 1/2 in socket or open end wrench.
GETTING STARTED
603-115G
Handle
Screws (x2)
Screws (x2)
WH-1xxG_001
