Charging from the van
D+ Ignition signal
LPS (COMMUNICATION - PIN 9) D+ Ignition signal
For automatic charging when the van turns on.
Connect a 0,75 mm
2
wire to pin 9 in the DB9 connector
to the van’s fuse box with D+ ignition signal.
10
LPS
1a Unpacking
1b Mounting
Charging from the van
2a Starter battery
2b D+ Ignition signal
Charging from mains
3 Mains connection
Outputs
4a 12 V Output
4b 230 V Output
5
LPS Remote
6 Test
LPS
Van Installation Guide
Example:
Fuse Holder with Power Distributor
For easy connection in the van’s fuse box:
Remove the fuse in the van and replace it with
a wire with a double fuse holder.
Connect the wire to the pin 9 in the DB9.
Double fuse holder in 3 versions:
Micro cable + 10A fuse
Mini cable + 10A fuse
Standard cable + 10A fuse
