10
HY B-EYE K25 TEATRO
5. SPECIFICATIONS
590
(23.23")
482
(18.98")
337
(13.27")
488
(19.21")
251
(9.89")
Zoom IN
301
(11.85")
Zoom OUT
387
(15.24")
329
(12.95")
HY B-EYE K25
POWER SUPPLIES
100-240V 50/60Hz
INPUT POWER
1250 VA @230Vac - 50Hz.
LIGHT SOURCE
37 RGBW LEDs driven at 40 Watt
Type: OSRAM OSTAR - Stage II LE RTDUW S2WN
Color Temperature: 6,000 K
Life: 50,000 hrs
OPTICS
4°-60° Electronic Zoom Range
EFFECTS SECTION
• Three operating modes: wash, beam, FX
(Kaleido effects)
• Bi-directional Rotating Front Lens
• Digital Wash-Beam Framing effect
• Beam edge softening control (in Wash mode)
• Pixel Patterning Macros with enhanced control
• 0-100% linear electronic dimmer
• Adjustable speed stop/strobe effect, with
instantaneous blackout
• Dedicated channel for color temperature setting
• White CT Emulation 2500-8000K
• RGBW auto-tuning to lamp CT Emulation
• Tungsten Lamp Emulation
• Slow Strobe: 1 flash/sec; Fast Strobe: 25
flash/sec
CONTROL AND PROGRAMMING
• 22/36/111/148 DMX channels
• Basic Engine (Standard and Shape Mode)
• Pixel Engine (RGB and RGBW Mode)
• DMX protocol signal: USITT DMX 512
• Art-Net / RDM
• Arkaos Kling-Net protocol already included in the
firmware
• Pan/Tilt Resolution: 16 bit
• Dimmer Resolution: 16 bit
• Movement control: vectorial
• DMX signal connection: 3 and 5 pole XLR input
and output
• Software upload through DMX input
BODY
• Aluminum structure with die-cast plastic cover
• Two side handles for transportation
• PAN and TILT lock for transport and maintenance
IP RATING
IP 20 - Protected against the entry of solid bodies
larger than 12mm (0.47”); No protection against the
entry of liquids.
NOISE LEVEL
Min 35.0 dBA (background 32.5)
ELECTRONICS
• Long-life auto-charging buffer battery
• Preset color and graphic effect macros
• Function reset controllable from a central control
unit
• Menu-driven internal self-test function
• Ethernet ready with RJ45 socket
• Display: backlit black-and-white graphic LCD
display
• Electronic check-up of every single parameter
with error alarm
• DMX level monitoring on each channel
• Automatic internal data transmission error
diagnostics
• Firmware upgrade even when the unit is not
connected to the power supply
• Firmware transfer from one light to another
MOTORS
Stepper motors, microprocessor controlled.
MOVING BODY
• Movement by means of two stepper motors,
controlled by microprocessor
• Automatic repositioning of PAN and TILT after
accidental movement not controlled by control
unit
• Travel:
- PAN = 540°
- TILT = 210°
WORKING POSITION
• Working in any position.
• Hanging system: with fast-lock omega clamps
(1/4 turn) on the base.
• Optional safety chain.
SAFETY DEVICES
• Automatic power safety derating in case of
overheat of the LED board
• Forced ventilation
CE MARKING
In conformity with the European Directives:
• 2014/35/EU - Safety of electrical equipment
supplied at low voltage (LVD).
• 2014/30/EU - Electromagnetic Compatibility
(EMC).
• 2011/65/EU - Restriction of the use of certain
hazardous substances (RoHS).
• 2009/125/EC - EcoDesign requirements for
Energy-related Products (ErP).
ETL
This product is available, on demand, with cETLus
Listed Mark.
PACKAGING
• Carton box + Polystyrene
• Carton box + Foam shell
• Flight case + Foam shell (2 position)
WEIGHT
27,5 Kg (60.6 lbs).
