1
1
2
3
2
2
3
4
Ethernet 1
DMX OUT
DMX IN
Ethernet 2
Gigabit
PowerCon IN
Main Switch
Antenna
Wi-Fi
USB IN
Encoder Wheels
3
CloudIO
3. INSTALLATION AND START-UP
3.1 Connecting to mains supply
Control Panel
- Fig. 3
DMX OUT
: used to connect the controlled lighting fixtures (a terminating plug must be inserted into the last luminaire with a resistance of 120Ohm,
minimum 1/4 W, between terminals 2 and 3).
DMX IN
: used to connect a Master Lighting Console
WiFi
: used to connect the CloudIO Box to a local AP WiFi for Cloud Service Connection
Ethernet 1
: Fast Ethernet for Art-Net connection
Ethernet 2
: GbE to be used to connected the CloudIo Box to a local AP Ethernet for Cloud Service Connection
Main Switch
: used to power on/power off the CloudIO BOx
PowerCon IN
: Main power input
USB IN
: Used to connect eternal USB keyboard, mouse or USB Mass-storage key
Pin assembly
- Fig. 2
Connecting and disconnecting power cable
- Fig. 4
