Clavister SG4300 Series, Getting Started Manual, Page: 14 / 68

2.2. Installing SFP Modules
Small Form Pluggable (SFP) modules come in different forms from different manufacturers. Shown
below are some typical units. The SG4300 Series does not come as standard with SFP modules and
these must be purchased separately.
Installation of different types SFP units is usually done in a similar way. With the units shown, the
modules are inserted into sockets with the label facing upwards. The module slides gently into
position by pressing inwards.
Figure 2.1. A Typical 1000 Base LX/SX Module
Figure 2.2. Installing a 1000 Base LX/SX Module
Figure 2.3. A typical 1000 Base TX module
2.2. Installing SFP Modules
Chapter 2. Installation
14