Note: Use an FQDN address for a time server
An
FQDN Address
object must be used when specifying a time server address. See the
relevant cOS Core Administration Guide section for more explanation.
Once the values are set correctly, press the
OK
button to save the values temporarily.
Configuration changes will not become active until the new configuration becomes the current
and active configuration. Doing this is discussed next.
Activating Configuration Changes
To activate any cOS Core configuration changes made so far, select the
Save and Activate
option from the
Configuration
menu (this procedure is also referred to as
deploying
a
configuration).
A dialog is then presented to confirm that the new configuration is to become the running
configuration.
After clicking
OK
, cOS Core
reconfiguration
will take place and, after a short delay, the Web
Interface will try to reconnect to the firewall.
Chapter 4: cOS Core Configuration
50