OP 3241
PNEUMATIC SPRING COMPRESSOR 4T
7
8
9
PROBLÈMES, CAUSES, REMÈDES
10
Block the cap to the shaft of the shock absorber
screwing the proper nut.
Now the shock absorber is mounted, use the foot
control lever to release completely the spring,
then move the arms on the outside and remove
the shock absorber now reassembled thanks to
the machine.
OPERATION
ANOMALIES
Reasons
Solutions
THE MACHINE DOES
NOT WORK
Check the con-
nection to the com-
pressed air system
Connect the ma-
chine to the local
pneumatic system
through the quick
connection equip-
ped
THE TWO ARMS DO
NOT RUN PROPERLY
ALONG THE COLU-
MNS
Dust and dirt on
the columns
Clean the columns
and the sliding par-
ts with a dry rag,
NEVER LUBRICATE
WITH GREASES OR
OILS
THE PISTON’S
SHAFT AFTER
MOVING FORWARD
DOES NOT KEEP
THE POSITION AND
GOES BACK
There is an air leak
in the cylinder
Contact customer
service to repair
the cylinder
