background image

English

GREAT BRITAIN •

 

customer service

 

tel:

 020 8247 9300 

e-mail

 [email protected] 

internet

 www.clasohlson.co.uk 

postal

 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ

Ver

. 20161122

Solar String Light

Art.no 36-6549  Model ZK-6100

Please read the entire instruction manual before using the product 
and then save it for future reference. We reserve the right for 
any errors in text or images and any necessary changes made 
to technical data. In the event of technical problems or other 
queries, please contact our Customer Services.

Safety

•  Handle the product with care, making sure not to damage 

the surface of the solar cell and ensuring that it is not 
covered with dust or affected by other contaminants.

•  The product must not be changed or modified in any way.
•  Do not let children play with the product.

3.  Adjust the angle of the solar cell 

to receive as much sunlight as 
possible.

4.  Hang up the string light in 

the desired location.

5.  The string light comes on 

automatically at dusk.

Replacing the battery:

Note:

 The string light can also 

be powered by a battery pack 
(sold separately) or a mains 
adaptor (not available in UK/
UAE) to enable it to be used 
all year round. To do so, first 
disconnect the solar cell from 
the string light connection cable 
and then replace it with either 
a battery pack or mains adaptor.

Placement/mounting

In the ground

1.  Set the switch on the back of the solar 

cell to 

ON

.

2.  Attach the ground spike to the solar 

cell and then push the spike into 
the ground.

Fastened to a structure

1.  Detach the bracket from 

the solar cell.

2.  Using the bracket 

as a guide, mark 
out the position of 
the mounting holes.

3.  Use an appropriate type 

of screw or fastener for 
the material of the structure. 

Note:

 Ensure that there are 

no electrical wires or water 
pipes in the wall where you 
intend to screw/drill.

4.  Set the switch on the back of the solar cell to 

ON

.

5.  Screw the solar cell back onto the bracket and adjust it to 

an angle to receive as much sun as possible.

6.  Hang up the string light in the desired location.
7.  The string light comes on automatically at dusk.

Care and maintenance

The string light and the solar cell can be cleaned by wiping 
them with a damp cloth. Use only mild cleaning agents, never 
solvents or corrosive chemicals.

1.  Remove the 4 screws on 

the back of the solar cell.

2.  Change the battery (1 × 1.2 V, 

AA 600 mAh NiMH) making 
sure the new battery is 
inserted with the correct 
polarity, see the picture. 

Note:

 The battery must 

only be replaced with 
a rechargeable battery.

Responsible disposal

This symbol indicates that this product should not 
be disposed of with general household waste. 
This applies throughout the entire EU. In order 
to prevent any harm to the environment or 
health hazards caused by incorrect waste 
disposal, the product must be handed in for 
recycling so that the material can be disposed 
of in a responsible manner. When recycling your 
product, take it to your local collection facility 
or contact the place of purchase. They will 
ensure that the product is disposed of in 
an environmentally sound manner.

Specifications

Length 

940 cm

Charging time 

6 hours (in persistent sunlight)

Operating time 

7 hours (when fully charged)

Rechargeable battery 

1 × 1.2 V, AA 600 mAh NiMH

Summary of Contents for ZK-6100






Reviews: