English
GREAT BRITAIN •
customer service
tel:
020 8247 9300
e-mail:
internet:
www.clasohlson.co.uk
1
2
3
4
Ver
. 20150609
Glass-Break Alarm
Art.no 36-6017 Model SST-14
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
• Never try to dismantle the product. The product contains no
replaceable parts.
• Never subject the product to knocks or blows.
• Never subject anyone to prolonged exposure to the high-
decibel alarm. Doing so could cause possible hearing damage.
• Remove the batteries from the product if it is not to be used
for a prolonged period.
• Never mix old and new batteries.
• Change all batteries at the same time.
• This product is intended for indoor use only. Do not expose
it to moisture.
Product description
Getting started
1. Remove the battery cover.
2. Remove the protective plastic film over the battery terminals.
Ensure that the batteries (2 × CR2032) are set in correctly,
according to the markings in the battery compartment.
3. Refit the battery cover.
Installation
Use
On/off
• Set the [ ON/OFF ] switch to the
ON
position.
• Set the [ ON/OFF ] switch to the
OFF
position.
Sensitivity
Adjust the alarm’s sensitivity using the [ HI/LO ] switch.
Refer to the
Installation
section above.
Low-battery indicator
This alarm is equipped with a low-battery indicator.
Press the test button to test the battery’s condition.
If the recessed LED shines red when the button is pushed
the battery is good. If it does not light the battery must be
changed.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Batteries
2 × CR2032 (included)
Alarm time
Continuous
Sound Level
> 95 dB
1. [ ON/OFF ] On/off
2. [ HI/LO ] Sensitivity switch
3. [ TEST ] Battery test button
4. Battery compartment
1. Peel the protective paper backing off the warning sticker.
Attach the alarm to a glass door or window so that
the warning sticker is visible through the glass. Make sure
that the glass is clean and dry before application.
2. Turn on the alarm with the power switch located on the left
side of the device.
3. When the glass is broken, shaken, or hit by some object
the alarm be triggered and sound continuously.
-
Adjust the alarm’s sensitivity using the [ HI/LO ] switch.
If the alarm is set for high sensitivity, it will react to
the slightest vibrations/movements. If set to low, a great
amount of vibration/movement is required for the alarm
to react.
-
The alarm will even work on wood and metal doors.
If the alarm is not placed directly in the centre of
the door/window, adjust the device to the high
sensitivity setting.
-
Select
LO
for windows exposed to high winds or
vibrations.
