background image

English

GREAT BRITAIN •

 

customer service

 

tel:

 0845 300 9799 

e-mail:

 [email protected] 

internet:

 www.clasohlson.com/uk

Ver

. 20140826

Wireless Keyboard and Mouse

Art.no  18-8413 Model  SMK-48350AG-UK
 

38-6600  

SMK-48350AG

Please read the entire instruction manual before using the product and 
then save it for future reference. We reserve the right for any errors in text 
or images and any necessary changes made to technical data. In the event 
of technical problems or other queries, please contact our Customer 
Services.

Safety

•  Do not subject the keyboard or mouse to knocks and blows.
•  Do not place the keyboard or mouse where there is a risk that it 

may fall into water or other liquids.

•  Do not place the keyboard or mouse close to a strong heat source 

or expose it to direct sunlight for prolonged periods.

•  Never attempt to dismantle, repair or modify the keyboard or 

mouse in any way. 

Operating instructions

Batteries

Mouse

1.  Remove the battery cover on the base of the mouse and insert 

1 × AA/LR6 battery. Note the polarity markings in the battery 
compartment to ensure correct battery insertion.

2.  Refit the battery cover.

Keyboard

1.  Open the battery cover 

by sliding it outwards.

2.  Insert a battery (AA/LR6). 

Note the polarity markings 
in the battery compartment 
to ensure correct battery 
insertion.

3.  Refit the battery cover  

by sliding it inward.

Connection

1.  Remove the USB receiver from its 

storage compartment on the base of 
the mouse.

2.  Plug the USB receiver into a vacant port 

on your computer. 

3.  The mouse and the keyboard will 

automatically be connected to your 
computer.

Standby mode

If the mouse is not used for 8 minutes it enters standby mode to save 
battery power. Pressing any of the buttons or moving the scroll wheel 
will reactivate the mouse.

Factory reset

Mouse

1.  Disconnect the USB receiver from the computer.
2.  Press down the right mouse button and the scroll  

wheel simultaneously.

3.  Plug the USB receiver back into the computer.

Keyboard

1.  Disconnect the USB receiver from the computer.
2.  Press [ ESC ] and [ K ] on the keyboard simultaneously.
3.  Plug the USB receiver back into the computer.

Care and maintenance

Clean the keyboard and using a lightly moistened cloth. Use only mild cleaning 
agents, never solvents or corrosive chemicals. Remove the battery from 
the keyboard and mouse if they are not to be used for a long time.

Disposal

This product should be disposed of in accordance with local regulations. 
If you are unsure how to proceed, contact your local council.

Specifications

Batteries

Mouse 

1 × AA/LR6

Keyboard 

1 × AA/LR6

Declaration of Conformity

Hereby, Clas Ohlson AB, declares that following product(s):

Wireless Keyboard and mouse

38-6600/18-8413

SMK-48350AG

is in compliance with the essential requirements and other relevant provisions 

of Directive 1999/5/EC and 2006/95/EC.

Article 3.1a (Safety):  EN 60950-1

Article 3.1b (EMC): 

EN 301489-1

 

EN 301489-3

Article 3.2 (Radio): 

EN 300440-1

 

EN 300440-2

Insjön, Sweden, July 2014

Klas Balkow

President

Clas Ohlson, 793 85 Insjön, Sweden

Reviews: