5
E
nglish
Depression
Open slot
2. Lay the fan head on
a flat surface.
3. Push the end of the support into the bracket on the fan head.
Make sure that is support is facing the right way. The side
with the depression should be on the side of the bracket with
the square hole.
4. Push the mounting bolt (10) through
the bracket and support.
5. Hold the support in line with the bracket
and screw the fan head angle locking
screw (3) all the way in. The screw should
protrude into the opening in the support
and limit the tilt angle.
6. Screw the lock nut (4) onto the mounting bolt
and tighten. Tighten the nut just enough that
the fan head can still be tilted.
7. Screw in the knob (9) for locking the fan
head angle. Set the desired tilt angle and
then tighten.
