background image

English

UNITED KINGDOM •

 

customer service

 

tel:

 020 8247 9300 

e-mail

 [email protected] 

internet

 www.clasohlson.co.uk 

postal

 Clas Ohlson Ltd, Aquilla House (First floor), 1 Becketts Wharf, Lower Teddington Road, Hampton Wick, Kingston Upon Thames, KT1 4ER

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and 
Imperial (pounds, stones), you can convert weight unit as follow: 

Condition 1:

 if the unit switch is inside battery 

                     case,
A. Open battery case cover on the back 
    of scale.
B. Pull up and down the unit switch to convert
    scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert 

     scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: 

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 1,
A.  Take out the used battery with the aid of a
     cuspidal object, as shown in picture 1.
B.  Install new battery by putting one side of the
     battery beneath the battery baffle and then
     pressing down the other side.
     Please take note to the polarity. 

Step 2: 

Gently step on the scale, then the scale

              will be automatically turned on. Stand
              evenly on the scale without moving and  
              wait until your weight shown on display
              is stable and locked. 
                 

picture 4

Condition 4: 

Open battery case cover on the 

                      back of scale, if battery case is the 
                      type shown in picture 4,
A. Take out the used batteries (with the aid of a 
     cuspidal object, if needed)        
B. Install new battery by putting one side of the 
     battery and then pressing down the other side.
     Please take note to the polarity. 

OPERATION

Type 1:

 3V lithium batteries(CR2032). 

               Please remove the isolation 

               sheet from the battery contact 

               before use.

Type 2:

  1.5V AAA batteries (excluded)

Step 1: 

To make sure accuracy, place the 

             scale on a hard, flat floor and avoid 
             carpet or soft surface. 

Remark: If the scale is one of our "slim" series 
(indicated on package), make sure to put it on 
hard surface such as marble, floor tile etc., and 
make sure no foreign bodies beneath the scale 
before weighing.

CR

20

32

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically 
switch off. Auto shut-off occurs if display shows
stable weight reading for approximate 8 seconds.

Condition 2:

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 2,
A. Pull the black tab outwards and the battery 
    will come out.
B. Install new battery by putting one side of 
    the battery beneath the contact and then 
    pressing down the other side. Please take 
    note to the polarity.

CR

203

2

black tab  contact

picture 2

Unit button

Condition 3:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

    is power on, LCD shows current weight unit.

    Press the button again to convert weight unit.

picture 3

Condition 3: 

Open battery case cover on the 

                      back of scale, if battery case is
                      the type shown in picture 3,
A.

Press battery gently, the battery will pop up 

     automatically.
B. Install new battery by connecting one side of 
    battery to the positive plate first, and then 
    pressing down the other side. Please observe 
    the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and 
Imperial (pounds, stones), you can convert weight unit as follow: 

Condition 1:

 if the unit switch is inside battery 

                     case,
A. Open battery case cover on the back 
    of scale.
B. Pull up and down the unit switch to convert
    scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert 

     scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: 

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 1,
A.  Take out the used battery with the aid of a
     cuspidal object, as shown in picture 1.
B.  Install new battery by putting one side of the
     battery beneath the battery baffle and then
     pressing down the other side.
     Please take note to the polarity. 

Step 2: 

Gently step on the scale, then the scale

              will be automatically turned on. Stand
              evenly on the scale without moving and  
              wait until your weight shown on display
              is stable and locked. 
                 

picture 4

Condition 4: 

Open battery case cover on the 

                      back of scale, if battery case is the 
                      type shown in picture 4,
A. Take out the used batteries (with the aid of a 
     cuspidal object, if needed)        
B. Install new battery by putting one side of the 
     battery and then pressing down the other side.
     Please take note to the polarity. 

OPERATION

Type 1:

 3V lithium batteries(CR2032). 

               Please remove the isolation 

               sheet from the battery contact 

               before use.

Type 2:

  1.5V AAA batteries (excluded)

Step 1: 

To make sure accuracy, place the 

             scale on a hard, flat floor and avoid 
             carpet or soft surface. 

Remark: If the scale is one of our "slim" series 
(indicated on package), make sure to put it on 
hard surface such as marble, floor tile etc., and 
make sure no foreign bodies beneath the scale 
before weighing.

CR

20

32

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically 
switch off. Auto shut-off occurs if display shows
stable weight reading for approximate 8 seconds.

Condition 2:

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 2,
A. Pull the black tab outwards and the battery 
    will come out.
B. Install new battery by putting one side of 
    the battery beneath the contact and then 
    pressing down the other side. Please take 
    note to the polarity.

CR

203

2

black tab  contact

picture 2

Unit button

Condition 3:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

    is power on, LCD shows current weight unit.

    Press the button again to convert weight unit.

picture 3

Condition 3: 

Open battery case cover on the 

                      back of scale, if battery case is
                      the type shown in picture 3,
A.

Press battery gently, the battery will pop up 

     automatically.
B. Install new battery by connecting one side of 
    battery to the positive plate first, and then 
    pressing down the other side. Please observe 
    the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and 
Imperial (pounds, stones), you can convert weight unit as follow: 

Condition 1:

 if the unit switch is inside battery 

                     case,
A. Open battery case cover on the back 
    of scale.
B. Pull up and down the unit switch to convert
    scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert 

     scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: 

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 1,
A.  Take out the used battery with the aid of a
     cuspidal object, as shown in picture 1.
B.  Install new battery by putting one side of the
     battery beneath the battery baffle and then
     pressing down the other side.
     Please take note to the polarity. 

Step 2: 

Gently step on the scale, then the scale

              will be automatically turned on. Stand
              evenly on the scale without moving and  
              wait until your weight shown on display
              is stable and locked. 
                 

picture 4

Condition 4: 

Open battery case cover on the 

                      back of scale, if battery case is the 
                      type shown in picture 4,
A. Take out the used batteries (with the aid of a 
     cuspidal object, if needed)        
B. Install new battery by putting one side of the 
     battery and then pressing down the other side.
     Please take note to the polarity. 

OPERATION

Type 1:

 3V lithium batteries(CR2032). 

               Please remove the isolation 

               sheet from the battery contact 

               before use.

Type 2:

  1.5V AAA batteries (excluded)

Step 1: 

To make sure accuracy, place the 

             scale on a hard, flat floor and avoid 
             carpet or soft surface. 

Remark: If the scale is one of our "slim" series 
(indicated on package), make sure to put it on 
hard surface such as marble, floor tile etc., and 
make sure no foreign bodies beneath the scale 
before weighing.

CR

20

32

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically 
switch off. Auto shut-off occurs if display shows
stable weight reading for approximate 8 seconds.

Condition 2:

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 2,
A. Pull the black tab outwards and the battery 
    will come out.
B. Install new battery by putting one side of 
    the battery beneath the contact and then 
    pressing down the other side. Please take 
    note to the polarity.

CR

203

2

black tab  contact

picture 2

Unit button

Condition 3:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

    is power on, LCD shows current weight unit.

    Press the button again to convert weight unit.

picture 3

Condition 3: 

Open battery case cover on the 

                      back of scale, if battery case is
                      the type shown in picture 3,
A.

Press battery gently, the battery will pop up 

     automatically.
B. Install new battery by connecting one side of 
    battery to the positive plate first, and then 
    pressing down the other side. Please observe 
    the polarity.

Positive plate

TO CONVERT WEIGHT UNIT

If the scale is with both measuring system of Metric(kilograms) and 
Imperial (pounds, stones), you can convert weight unit as follow: 

Condition 1:

 if the unit switch is inside battery 

                     case,
A. Open battery case cover on the back 
    of scale.
B. Pull up and down the unit switch to convert
    scale unit between kg-lb-st.

Unit switch

kg/lb/st

Battery

Cover

Unit switch

kg/lb/st

Condition 2:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Pull up and down the unit switch to convert 

     scale unit between kg-lb-st.

kg

kg

BATTERY

TO REPLACE BATTERY

picture 1

Condition 1: 

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 1,
A.  Take out the used battery with the aid of a
     cuspidal object, as shown in picture 1.
B.  Install new battery by putting one side of the
     battery beneath the battery baffle and then
     pressing down the other side.
     Please take note to the polarity. 

Step 2: 

Gently step on the scale, then the scale

              will be automatically turned on. Stand
              evenly on the scale without moving and  
              wait until your weight shown on display
              is stable and locked. 
                 

picture 4

Condition 4: 

Open battery case cover on the 

                      back of scale, if battery case is the 
                      type shown in picture 4,
A. Take out the used batteries (with the aid of a 
     cuspidal object, if needed)        
B. Install new battery by putting one side of the 
     battery and then pressing down the other side.
     Please take note to the polarity. 

OPERATION

Type 1:

 3V lithium batteries(CR2032). 

               Please remove the isolation 

               sheet from the battery contact 

               before use.

Type 2:

  1.5V AAA batteries (excluded)

Step 1: 

To make sure accuracy, place the 

             scale on a hard, flat floor and avoid 
             carpet or soft surface. 

Remark: If the scale is one of our "slim" series 
(indicated on package), make sure to put it on 
hard surface such as marble, floor tile etc., and 
make sure no foreign bodies beneath the scale 
before weighing.

CR

20

32

battery baffle

battery baffle

AUTOMATIC SWITCH OFF

When you step off the scale, it will automatically 
switch off. Auto shut-off occurs if display shows
stable weight reading for approximate 8 seconds.

Condition 2:

Open battery case cover on the 

                      back of scale, if battery case is 
                      the type shown in picture 2,
A. Pull the black tab outwards and the battery 
    will come out.
B. Install new battery by putting one side of 
    the battery beneath the contact and then 
    pressing down the other side. Please take 
    note to the polarity.

CR

203

2

black tab  contact

picture 2

Unit button

Condition 3:

 if the unit switch is on the back of 

                     the scale,

A. Find unit switch on the back of scale.

B. Press the unit conversion button when scale

    is power on, LCD shows current weight unit.

    Press the button again to convert weight unit.

picture 3

Condition 3: 

Open battery case cover on the 

                      back of scale, if battery case is
                      the type shown in picture 3,
A.

Press battery gently, the battery will pop up 

     automatically.
B. Install new battery by connecting one side of 
    battery to the positive plate first, and then 
    pressing down the other side. Please observe 
    the polarity.

Bathroom scale

Art.no. 44-3815  Model  EB1610H

Please read the entire instruction manual before using the pro-
duct and then save it for future reference. We reserve the right 
for any errors in text or images and any necessary changes 
made to technical data. If you have any questions concerning 
technical problems please contact our Customer Services.

Safety

•  This product is a precision instrument and should be 

handled with care and protected from knocks and rough 
treatment.

•  Place the product in the same place every time you use it.
•  Always place the product on an even and level surface for 

best results. An uneven surface under the scale can cause 
the readings to fluctuate.

•  Weigh yourself without clothes and shoes at the same time 

every day, preferably in the morning before breakfast. Place 
your feet in the same place every time you use the scale.

•  The displayed readings are rounded up/down to the nearest 

100 g.

Batteries

1.  Open the battery compartment on the bottom of the scale 

and insert 2 x AAA/LR03 batteries (sold separately).

2.  Refit the battery cover.

Instructions for use

1.  Place the scale on an 

even, hard surface.

2.  Stand on the scale 

and it will come 
on automatically. 
The display will 
stop flashing once 
weighing is complete.

3.  The scale 

automatically shuts 
off as soon as you 
step off it.

4.  Press the [Unit 

button] on the bottom 
of the scale if you 
want to change the 
unit of measurement. 
You can weigh 
yourself in kilos (kg) 
or pounds (lb) or 
stones (st:lb).

Care and maintenance

•  Clean the scale by wiping it with a damp cloth. Use only 

mild cleaning agents, never solvents or corrosive chemicals.

•  Never expose the product to liquids or moisture.
•  Remove the batteries from the product if it is not to be used 

for a long time.

The following error messages can appear on  
the display

Err

The weight capacity of the scale has been 
exceeded.

Lo

The batteries are low. Insert new batteries.

C

If a C appears on the display when you 
step off the scale, then weighing was not 
successful. Weigh yourself again.

If the display does not return to normal or the scale shows an 
error message, take out the batteries and wait for 5 seconds for 
the electronics to be reset. Insert the batteries again.

Responsible disposal

This symbol indicates that the product should 
not be disposed of with general household waste. 
This applies throughout the entire EU. In order to 
prevent any harm to the environment or health 
hazards caused by incorrect waste disposal, the 
product must be handed in for recycling so that 
the material can be disposed of in a responsible 
manner. When recycling your product, take it to your local collection 
facility or contact the place of purchase. They will ensure that 
the product is disposed of in an environmentally sound manner. 

Specifications

Batteries

 

2 x AAA/LR03 (sold separately)

Max weight

 

150 kg

Size

 

 

 300 x 300 x 20 mm

Ver

. 20200518

Reviews: