English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
1
2
3
4
Ver
. 20180920
Earthed Plug-in Timer
Art.no 36-5573
Model 7GD/3A
Please read the entire instruction manual before using the product and
then save it for future reference.
We reserve the right for any errors in text or images and any necessary
changes made to technical data.
In the event of technical problems or other queries, please contact our
customer services.
Safety
• Make sure that the light or other load device connected to the timer
is designed for use with a 230 V AC, 50 Hz power supply.
• The timer is only intended for indoor use.
• Make sure that the plug of the connected load device is pressed all
the way into the socket of the timer.
• Never expose the timer to impacts, shocks, rain or moisture.
• Make sure that the electrical socket that the product is plugged into
is easily accessible in case it and the connected product need to be
quickly disconnected from the mains electricity.
• Do not connect products of this type to each other.
• Do not cover the product.
Specifications
Rated voltage
230 V, 50 Hz
Max load
16 A resistive, 2 A inductive
Operating temperature
0–55 ºC
Accuracy
±10 min/day
Setting
Connection
1. Set the desired operating time on the timer.
2. Make sure that the light (or other load device) which is plugged
into the timer is switched off before it is plugged into the socket of
the timer.
3. Plug the timer into a wall socket.
4. Set the selector switch (1) to desired position.
- The
ON
position will bypass any settings on the dial and the timer
socket will be on all the time.
- In the
TIMER
position the timer socket will be controlled by
the setting dial.
Care and maintenance
• Unplug the timer from the wall socket before wiping it clean with
a dry towel.
• The timer should be unplugged from the wall socket if it is not to be
used for a long time.
• The timer should be stored in a dry, dust-free place.
Responsible disposal
1. Time segment
2. Current time indicator
3. Selector switch
4. Setting dial
• The mechanical timer can be set for up to 48 on/off operations
per day. The minimum length of operation (1 segment) is 15 minutes.
• Set the on/off operations by pressing in the segments (1) on
the setting dial (4).
Example:
to switch a light on at 22:00 (10 pm) and off at 23:00 (11 pm):
1. Press in the four segments from “22” to “23” on the setting dial.
2. Set the current time by turning the setting dial clockwise until
the current time is indicated by the black arrow (2).
3. Set the selector switch (3) to
TIMER
to control the on/off operations
via the timer.
4. The light will now come on at 22:00 and go off at 23:00 every day
and will be off the rest of the time.
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any
harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed
in for recycling so that the material can be disposed of
in a responsible manner. When recycling your product,
take it to your local collection facility or contact the place
of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.