2
English
3D Printer Quickstart guide
Art.no 38-8870 Model ADVENTURER 3
Please read the entire instruction manual before using the product and then save it for
future reference. We reserve the right for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or other queries, please contact our
Customer Services (see address details on the back).
Safety
Follow the safety guidelines below. Make sure that you have read and understood all the safety
instructions and warnings in any other documents included with this product and its accessories.
• Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
• Never use the product in areas where explosive gases or liquids are stored.
• Never use the product when you are tired, sick, under the influence of alcohol or medicine.
• Always unplug the mains lead when moving the product for service or maintenance.
• If extension leads are used, ensure that they are designed for the purpose for which they are
intended to be used.
• Only use earthed power points with a voltage rating which correspond to the specifications
listed on the rating plate of the product.
• Do not place the mains lead where it can be crushed or damaged by sharp edges.
• Never use the product if it or the mains lead is damaged in any way.
• Never try to open the housing or try to repair the product in any way. The product contains
no user-serviceable parts.
• Never attempt to tamper with or modify the product in any way.
• Do not place the product where it is exposed to moisture or affected by water or any other
types of liquids. Avoid exposing the product to direct sunlight, dust or extremely cold or hot
environments. The product is designed to function optimally in temperatures of 15−25 °C
(59−77 °F) and at a humidity level of 20−50 %.
• Tie back any long hair and ensure that no loose clothing or jewellery risks coming into
contact with any moving or hot parts of the product.
• Place the product on a stable, even surface and at a safe distance from all flammable
materials.
• Never store or place metal objects or any type of liquids within the printing area or on top of
the product. Doing so could lead to fire, electric shock or other personal injury.
• Only operate the product in well-ventilated areas.
• Printed models should never be exposed to any type of heat, such as that emitted by
cookers, ovens, fires and candles.
• Turn off the product and unplug it from the wall socket immediately if:
-
the product begins to emits smoke or smells burnt
-
the product emits unusual sounds
-
metal or any types of liquid comes into contact with the product
-
there is a possible risk of thunderstorms
-
there is a power cut
• This product contains moving parts that can cause personal injury and parts which reach
temperatures of 200−300 °C.
Keep all parts of your body away from the printing area when the product is in operation.
Never touch the print head while printing is in progress.
• Let the product cool down completely after use before handling it.
